TESLA Dielectric Boots SB FO E PS CI HI WPA WR HRO SR
3 sold in last 24 hours
CE EN ISO 20345:2022 SB FO E PS CI HI WPA WR HRO SR
Description
Toecap: 200J polymeric composite non-thermic
Upper: Suede leather 1,8-2,0 mm and PU coated anti-scratch leather Hydro Internal lining Windtex® waterproof membrane
Midsole: PS certified antiperforation dielectric composite fabric
Insole: Dielectric insulating foam open-cell polyurethane extra comfort
Sole: Rubber/Outsole, PU/Midsole
Other: 20.000V Sole Insulation (ASTM 2413-24, C.S.A. Z195-14, INSULATING SOLE FROM >1.000 M ohm), Water Resistant, HRO +300°C
High safety shoe, WPA anti-scratch back leather thickness 1,8-2,0 mm.
Perspiring and abrasion resistant fabric lining.
Soft, Windtex® water resistant membrane lining, with very good perspiration and abrasion resistance.
Shoe with refracting fabric insert. Soft, lined and padded tongue.
COMPLETELY METAL FREE SHOE
TOECAP 200J polymeric composite non-thermic according to EN 22568
PS MIDSOLE fabric INSULATION composite flexible anti-perforation according to EN 22568
SOLE HARD ROCK INSULATING bidensity polyurethane and INSULATING RUBBER resistant to hydrocarbons and to abrasion, anti-shock and anti-slipping
Article HRD057E has been tested using a method analogous to ASTM F2413-24 (EH) and CSA Z195-14: determination of resistance to an electric shock, increase 1 kV/sec, voltage 20,000 V/60 Hz holding the voltage for 1 minute. Electrical current requirement below 1.0 mA.
The outsole of the footwear, within specific limits (in the absence of moisture, not referring to the upper), was tested using a method analogous to EN ISO 20345:2022 to provide electrical insulation against voltages up to 1000 V M ohm >1000.
(Test report No. 4325006.01/EA)
DIELECTRIC INSOLE bimaterial extra comfort with activated carbon, breathable, removable, anatomical, absorbent, insulating and antibacterial.
Environmentally Sustainable Eco-Friendly
FO sole resistance to hydrocarbons
E energy absorption on seat region
PS sole resistance to perforation non metallic (nail Ø3,0mm)
CI cold insulation of sole complex -17°C
HI heat insulation of sole complex
HRO resistance to hot contact of the outsole
WR water resistant shoe
SR sole resistance against slipping
Size 39-47 Shoe weight Sz 42 gr. 625
* The calculated weight excludes laces and insoles.
| Footwear size | 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 |
| Brand | GIASCO |